Tractor, a very powerful, low-speed vehicle similar to a car or truck but designed for off-road use. The two main models have wheeled and the continuous track. Tractors are used in agriculture, construction, road construction, etc., in the form of scrapers, and diggers.

In agriculture, the main features of the tractor include harrows and weed control cultivators, seed drills and seed dispersal plants, replanted seedlings for planting crops in the field, fertilizer and seed dispensers, weeders and weed killers, irrigation sprays and pesticides. Some compounds, used for cutting and threshing grain, were also pulled by tractors.

Additional tractor utilities are common in industry, field maintenance, and construction. A simple adhesive of the box blade is used to dig into the ground and spread the material into a flat, level layer, such as a stone surface; the rear blade attachment is used in the same way.
Many modern tractors operate engines that run on gasoline, paraffin (LPG), LPG (liquefied petroleum gas), or diesel.


Tractors are pieces of the most useful equipment, and with proper adjustment, they can work for years with very little problems. Because there are so many different types of tractors that use certain materials, maintenance may be very different from tractor to tractor. However, there are some international things you can do to help ensure a long and healthy life for you.

  1. Give the tractor a visual inspection.
  • Give your tractor a visual inspection before and after each use.
  • Be aware of any problems you identify to make sure you fix them the next time you use a tractor.
  1. Inspect belts and pipes.
    As with a car, the tractor engine depends on the number of rubber pipes and usually at least one belt. Look at all the rubber parts above for signs of aging or damage. Older rubber parts should all be replaced.
  • Check the gloss on the sides and bottom of any belts that may indicate slipping.
  • Any broken rubber should be replaced.
  1. Change oil every 100 hours (or as mentioned in the book).
    Different tractors are designed to operate at different intervals between oil shifts, so be sure to check the manual to find out how long you can drive between them. To change the oil, remove the plug from the oil pan and allow the oil to drain into the appropriate container.
  • Once the oil has been removed, replace the drain plug and remove the oil filter.
  • Remove the new oil filter and refill the tractor with the correct amount of oil, as specified in the user manual.

These are some of the useful tips to take care of your tractor for a longer and efficient run.

Do give your valuable feedback at or WhatsApp us at 8383823335

Leave a Reply

Your email address will not be published. Required fields are marked *